FPV LiPo burn rate, normal pa ba 50 cycles?
Posted: Sun Jun 28, 2026 5:00 am
5-inch FPV. Tattu 1300mAh 4S 95C packs. Bought 4 last year.
After ~50 cycles each, voltage sag noticeably worse. Pack that pulled 60A for 4min now drops to 13.2V under load (used to hold 14.8V).
Normal degradation? Or am I abusing them?
Usage:
After ~50 cycles each, voltage sag noticeably worse. Pack that pulled 60A for 4min now drops to 13.2V under load (used to hold 14.8V).
Normal degradation? Or am I abusing them?
Usage:
- Charged at 1C (1.3A) usually
- Discharged to 3.7V/cell minimum (storage level)
- Stored at 3.85V/cell between use
- No physical crash damage